Re: [CG] Pièces carbone
Posté: Mer Nov 20, 2019 1:50 pm
Hello to everyone my name is George.
I have been subscribed after Fred's invitation and i have to thank him in public for his kindness and support
Please excuse me because I am writing in English but my French are pretty basic.I have written my forum surname wrong using a double "l". Lets hope that an administrator could help me to correct it.
We have a shop situated in Greece with 25+ years of experience in the Motorsport world.We have our own cnc machines and foundry and composite materials department.
We have worked with race cars and rally cars.We have developed several parts for different cars in the years and have worked with motorbikes.The past years we have done some work with drift cars that are popular these days.
We can do almost anything a client needs and build it to the highest specs using all kind of materials.The difficult part is to identify what does the speedster market actually needs.We work with passion and dedication trying to do the best piece at the best possible price to pleasure the owner of the car and give the opportunity to own a piece developed and builded at the best quality possible.
I own an opel speedster turbo that it has been developed in every single part and we are ready to present these parts in the market very soon.Right now we have almost ready all the matrixes to do the whole car in carbon fiber going from the hard top to the front hatch to the full interior.And when i say full interior i mean everything that you see in the speedsters cabin.A full dashboard that it is going to replace the oem piece completely and it is going to have same dimensions and fit as oem part did.Rear panel with that has the speakers on... everything.We do not use fiberglass at all.Every single part is made of carbon fiber.We use Kevlar core to make the part structural engineered at highest specifications.Our carbon kevlar seats are made to FIA carbon specifications to ensure top quality and safety.
We are thinking to do front and rear clams and even the doors if there is a market for these pieces.
A virtual catalog is quite difficult to be settled as it could be endless.
We have a cnc brake balance bar unique to the speedster/lotus chassis and plug n play.It is the first in the world that replaces even the plastic oem clutch master cylinder with a Motorsport aluminium one.We have a cnc state of the art speedster/lotus shifter that incorporates the handbrake lever and it is unique.
We have developed the getrag f23 gearbox and have builded and tested new ratios for the speedster turbo ready to take up ridiculous amounts of torque and could be used in opel Astras in the dragster strip.On the speedster it would be unbreakable.We can do every gear ratios going from an NA 2.2 speedster with 150-180 bhp to a turbo monster with 600 bhp and everything in between.
We have a new intake manifold for the z20let/leh/ler engine designed to maximize engine performance.It has been especially developed to take 3 different throttle bodies.Oem,74mm and 82mm.All of them are bosch and plug n play in our intake manifold and no harness modifications are needed as it has the same plug.We have been developing an exhausts systems with the final parts and backboxes made out of aluminium in order to have a low weight exhaust system affordable to all owners.
We can build the z20let or the z22se up to every spec and do the ecu according to every single use and owners needs with oem or after market ecu.We can build a new harness with milspec plugs or oem plugs.
Brake discs with cnc bells
Handbrake calipers
Aluminium gas tank with degas system and 3 interior compartments
Cnc front tow hook with cnc tow mount
Cnc uprights for lowered cars to correct bump steering and roll centres
Toe links for street cars and race cars
We can even have your car here and do a full rebuild or development to a fast road or track day or completely race car with fia roll cage ecc.
We can arrange group buys or treat every single owner according to his needs.
Thank you for time and for the opportunity you gave me for this presentation.
Merci beaucoup
I have been subscribed after Fred's invitation and i have to thank him in public for his kindness and support
Please excuse me because I am writing in English but my French are pretty basic.I have written my forum surname wrong using a double "l". Lets hope that an administrator could help me to correct it.
We have a shop situated in Greece with 25+ years of experience in the Motorsport world.We have our own cnc machines and foundry and composite materials department.
We have worked with race cars and rally cars.We have developed several parts for different cars in the years and have worked with motorbikes.The past years we have done some work with drift cars that are popular these days.
We can do almost anything a client needs and build it to the highest specs using all kind of materials.The difficult part is to identify what does the speedster market actually needs.We work with passion and dedication trying to do the best piece at the best possible price to pleasure the owner of the car and give the opportunity to own a piece developed and builded at the best quality possible.
I own an opel speedster turbo that it has been developed in every single part and we are ready to present these parts in the market very soon.Right now we have almost ready all the matrixes to do the whole car in carbon fiber going from the hard top to the front hatch to the full interior.And when i say full interior i mean everything that you see in the speedsters cabin.A full dashboard that it is going to replace the oem piece completely and it is going to have same dimensions and fit as oem part did.Rear panel with that has the speakers on... everything.We do not use fiberglass at all.Every single part is made of carbon fiber.We use Kevlar core to make the part structural engineered at highest specifications.Our carbon kevlar seats are made to FIA carbon specifications to ensure top quality and safety.
We are thinking to do front and rear clams and even the doors if there is a market for these pieces.
A virtual catalog is quite difficult to be settled as it could be endless.
We have a cnc brake balance bar unique to the speedster/lotus chassis and plug n play.It is the first in the world that replaces even the plastic oem clutch master cylinder with a Motorsport aluminium one.We have a cnc state of the art speedster/lotus shifter that incorporates the handbrake lever and it is unique.
We have developed the getrag f23 gearbox and have builded and tested new ratios for the speedster turbo ready to take up ridiculous amounts of torque and could be used in opel Astras in the dragster strip.On the speedster it would be unbreakable.We can do every gear ratios going from an NA 2.2 speedster with 150-180 bhp to a turbo monster with 600 bhp and everything in between.
We have a new intake manifold for the z20let/leh/ler engine designed to maximize engine performance.It has been especially developed to take 3 different throttle bodies.Oem,74mm and 82mm.All of them are bosch and plug n play in our intake manifold and no harness modifications are needed as it has the same plug.We have been developing an exhausts systems with the final parts and backboxes made out of aluminium in order to have a low weight exhaust system affordable to all owners.
We can build the z20let or the z22se up to every spec and do the ecu according to every single use and owners needs with oem or after market ecu.We can build a new harness with milspec plugs or oem plugs.
Brake discs with cnc bells
Handbrake calipers
Aluminium gas tank with degas system and 3 interior compartments
Cnc front tow hook with cnc tow mount
Cnc uprights for lowered cars to correct bump steering and roll centres
Toe links for street cars and race cars
We can even have your car here and do a full rebuild or development to a fast road or track day or completely race car with fia roll cage ecc.
We can arrange group buys or treat every single owner according to his needs.
Thank you for time and for the opportunity you gave me for this presentation.
Merci beaucoup